Search My Blog

Friday, October 15, 2010

3D printing with visible light - Hack a Day

3D printing with visible light

posted Oct 15th 2010 9:00am by Mike Szczys
filed under: tool hacks


This 3D printer manages some pretty fantastic resolution, and these are just the early results of [Junior Veloso's] build. He put together a machine that prints objects in resin that cures in visible light. To print, a thin layer of raw liquid resin self-levels across a printing surface and a DLP-based projector shines light from below, onto the portion to be hardened. The z-axis then pulls that layer up and the next to be printed will become the newest bottom layer. Horizontally the printer yields 1024×768 resolution with a layer thickness as small as 0.01 mm. No wonder he’s turning out this kind of quality.

The model above took 5 hours to print, with eight-second exposure for each layer, and 0.1mm layer thickness. There is lots of good information on his blog, from the early planning, to the finished hardware so take some time to learn about this fascinating project.

tagged: , , , , ,

Go there...
http://hackaday.com/2010/10/15/3d-printing-with-visible-light/

See his Blog for more Pics and info...
Homemade High Resolution 3D Printer - DIY
3D printing with visible light - Hack a Day
Homemade High Resolution 3D Printer - DIY: Last post for today... initial plans and findings
Homemade High Resolution 3D Printer - DIY: Good looking Printer...
Homemade High Resolution 3D Printer - DIY: Final results.....
Don

No comments: