| The TA 1600 system was introduced in 1983 at the CeBIT (which was only a part of the "Hannover-Messe" by that time). TA showed a few sample applications and the 1600 family in general. Triumph Adler's hardware included also the 1600/20-3 which was supplied with a permanent-swap-HDD-unit. This unit had a memory/storage capacity of 2 x 8 MB (Winchester technology). Triumph Adler said the system (the 1600) will fit the demand of medium-sized businesses, due to the facts that these companies w... |
| Called the Midwich Microcontroller, this British computer was developped to provide a small desktop micro capable of running other equipment throug a variety of interface cards. In 1979 an Italian IC manufacturer designed and began to sell a single board micro system that could be expanded to a full system with a VDU, discs, etc. Called the Nanocomputer, it was manufactured by SGS Ates and one of the distributors in the UK was Midwich. The Nano was somewhat expensive and suffered from a numbe... |
| This is an extremly rare TRS-80 Model 1 clone, based on an other clone: The Komtek 1 (from Germany). It's equiped with a Level II basic and powered by a Zilog Z80 cpu. _________ Contributors : Incog... |
| The BASF 7000 systems are professional computers from Germany. They seem to be based on the Microterm II Intelligent Terminal by Digi-Log Systems, Inc. There were several models in the 7000 serie.... |
| PCC 2000 is a professional computer released in 1978. It was designed in 1978 by Pertec, the company which merged with MITS by the end of 1976. The PCC is conceived as a monobloc machine, where the display and two 8" floppy disk drives are built-in the main case. The mechanical keyboard offers separated numeric and editing keypads. The system is powered by an Intel 8085 microprocessor and offers 64 KB RAM. The whole thing was apparently delivered with an extended Basic language, which has... |
| TAP 34 is a self design of Terta company from Hungary. Primarily it was designed as a terminal for big computer systems but it was also able to process data alone. The main integrated circuits were assembled in the USSR and in Hungary by Tungsram, but several parts were imported from other countries. The built-in monitor was a DME-28 monochrome CRT made by Orion. This company was famous for its televisions in Hungary and the other KGST countries. The floppy drive attached to the compute... |
| Based on the MCM 70 / 700 (see this entry for more info), the MCM 800 followed in 1976. It was faster, included 16 KB RAM (instead of 8 KB for the 700), and included the ability to drive an external monitor. Among other things, MCM 800s were used in one of the first french industrial network called Gixinet (along with ARCnet). This was a token-bus type network developped by the Gixi company.... |
| The Imlac PDS-1 is a graphical minicomputer made by Imlac Corporation (founded in 1968) of Needham, Massachusetts. The PDS-1 debuted in 1970 and is considered to be the predecessor of all later graphical minicomputers and modern computer workstations. The PDS-1 had a built-in display list processor and 4096 16-bit words of core RAM. The PDS-1 used a vector display processor for displaying vector graphics as opposed to the raster graphics of modern computer displays. The PDS-1 was often used with... |
| Between 1984 (in the U.S.) and 1986 (in Germany), Commodore International celebrated the 1,000,000 machines sold mark in these respective countries by issuing special "Gold" editions of the Commodore C64. These machines were regular C64 models, except they were Golden-colored and fixed on a commemorative plate. The following information comes from Death Adder : Until December 1986, 1,000,000 Commodore 64s were sold in Germany. On this occasion, Commodore Buromaschinen GmbH (... |
| PCC 2000 is an obscure professional computer released in 1980. It was marketed by Ordisor in France, (a company belonging to the group Sofragem) but the machine was in fact imported from U.S.A. The PCC 2000 was designed there in 1798 by Pertec, the company which merged with MITS by the end of 1976. The only information source we have for the french version is an advert from may 1980. Looking at the picture, the PCC seems to be conceived as a monobloc machine,... |
| The Columbia MPC (for Multi Personal Computer) was the first exact copy of the young IBM PC. This desktop clone version will be followed few months later by a portable version designed by the new Compaq company. Technically, there is nothing to say about this computer which hardware features are exactly the same as those of the IBM 5150. However, for about $1500 less, the MPC offered standard features that were optional on the ... |
| The TS-803 succeeded to the TS-802. Although it was basically the same CP/M machine, it had several notable enhancements. The all-in-one case had an innovative design. The main unit and mass storage devices were mounted vertically at the right side of a large tilting 14" green display (at the time the standard size was of 12"). The keyboard was also greatly improved. It offered 16 programmable function keys and 10 pre-programmed text-editing keys. It was... |
Read more...
http://www.old-computers.com/museum/default.asp
- Old-computers.com
- OLD-COMPUTERS.COM : The Museum
- OLD-COMPUTERS.COM : HISTORY / Time-Line
- OLD-COMPUTERS.COM ~ Forums
- OLD-COMPUTERS.COM : The STORE / GOODIES
- phalanx xr 12 - Google Search
- OLD-COMPUTERS.COM Museum ~ Northstar Advantage
- Welcome to OLD-COMPUTERS.COM !
- OLD-COMPUTERS.COM Museum ~ Tandy Radio Shack TRS 80 PC-2 software & screenshots
- Space 1999: An isometric action adventure game for your Oric
- The Official Blog of Benjamin J Heckendorn
Don
No comments:
Post a Comment