Android Talks Pulsewave
posted Nov 10th 2010 5:16am by Joseph Thibodeaufiled under: android hacks, digital audio hacks, portable audio hacks
Serial communications are a mainstay of digital computing. They don’t require much physical infrastructure and they exist in variations to fit almost any application. The behaviour of serial communications lines, varying from high to low voltage in a timed pattern, is analogous to a 1-bit DAC. Using a whole DAC for serial communication would be a waste in most cases, but the [RobotsEverywhere] team found an exception which you may have encountered already.
Since the audio output of the Android is accessible and addressable, [RobotsEverywhere] wrote source code to use the left and right channels as separate serial communication lines. This circumvents the need to bust into the device and muck about with the hardware which is great if you want a no-risk hack that allows communications to an RS232 port. Any hardware on which you can write to the DAC (and control the sampling rate) is a potential target.
There are some external electronics required to convert the audio signal to TTL, but it’s not very complicated–a couple of comparators and change. You can see it in action after the break.
As a bonus, when you’re done for the day you can plug in your headphones and listen to the soothing poetry of pulse waves all night long.
tagged: android, dac, rs232, serial
Go there and see Video in Full Screen...
http://hackaday.com/2010/11/10/android-talks-pulsewave/
This is Very Cool! I am Not a Programmer... But, I can see allot of potential Uses for this!:)
Don
No comments:
Post a Comment