Arduino: Weather-Shield – schematics, layout, code, … – everything you need
I've been working quite a while on my weather station project. Since the first version of the hardware had some bugs, I redesigned the electronics from scratch and created a weather shield for the Arduino. So here it is:
Overview:
The shield has several sensors:
- barometric pressure sensor – BMP085, from Bosch, I2C interface
- humidity sensor – SHT11, from Sensirion, proprietary serial interface
- light sensor, connected to an ADC-In
- DIO, e.g. for a wind meter
- ADC-Ins for measuring the voltage in the solar system part of the system
Apart from the weather shield I also attached a Xbee shield in order to transmit data wirelessly to a server PC, because I want to display the data on a website.
Read More...http://www.zipfelmaus.com/blog/arduino-weather-shield-schematics-layout-code-everything-you-need/
Weather Station - Arduino Weather-Shield – schematics, layout, code – everything you need
- Homebrew weather station plus a pan and tilt camera rig - Hack a Day
- Arduino: Weather-Shield – schematics, layout, code, … – everything you need | Zipfelmaus - Blog
- Arduino Pan&Tilt-System | Zipfelmaus - Blog
Don
No comments:
Post a Comment