Building a power supply around a DC-DC converter
posted Sep 12th 2010 8:00am by Mike Szczysfiled under: misc hacks
The EEVblog is on a roll with interesting topics lately. In the latest episode [Dave] takes us through the nitty-gritty of switch mode power supply design. Using DC-DC converter IC’s in not especially hard. The datasheets tend to have fairly good usage schematics but there’s always a bit of heartache that goes into figuring out which external components will make for an optimal design. Get your calculator out and, in the video after the break, he’ll walk you through choosing component values based on the formulas for the MC34063 converter chip.
[Dave] makes the point that this is an extremely common chip, available from several manufacturers, and often found in consumer electronics. In fact, the switchmode supply hack from last month was using a regulator based around the MC34063. So you can buy it or scavenge for it. One thing to note though, we checked Mouser and Digikey and they’re pretty short on these chips right now. Plan your projects accordingly.
[Thanks Ove]
tagged: boost, buck, converter, dc-dc, mc34063
Go there see Video...
http://hackaday.com/2010/09/12/building-a-power-supply-around-a-dc-dc-converter/
Don
No comments:
Post a Comment